Filter M Yellow (2 pcs.)

Filter M yellow (2 pcs.)

A filter purifies the paint you are going to spray. The thinner the paint, the finer the filter should be. A filter will wear well and remain usable for a long time when properly cleaned. Still, it is a good idea to replace a filter occasionally in order to maintain a perfect result.

The yellow filter is suitable for volatile substances, such as varnishes, undercoats, primers, fillers, interior emulsion paint and is used in combination with middle-sized tips such as: Tip M 515 (all tips with the last two digits lower than 16).

The filter must be properly placed in the handle of paint sprayer gun. Paint is forced through the filter before atomisation takes place in the tip. This will catch any unevenness in the paint. The manual of your airless paint sprayer explains how to place the filter precisely.

Suitable for Wagner airless paint guns.

To be used with the:

• Wagner Project 115
• Wagner ProjectPro 117
• Wagner ProjectPro 119
• Wagner Airless Sprayer Plus
• Wagner Power Painter 60
• Wagner Power Painter 90

Article number: 0418712

All sizes:


• Filter XS-S Red is suitable for thin particles such as: varnish, water and oil-based paints and is suitable for smaller tips such as the XS 409 and S 411.
• Filter M Yellow is suitable for volatile substances, such as: varnishes, undercoats, primers, fillers, interior emulsion paint and is used in combination with middle-sized tips such as: Tip M 515 (All tips with the last two digits lower than 16).
• Filter L-XXL White is suitable for less volatile substances, such as: varnishes, undercoats, primers, fillers, emulsion paint interior and emulsion paint exterior, and tectyl protective coatings. It is used in combination with large tips. Consider the L 517, XL 519, XXL 521 (All tips with the last two digits lower than 22).